1440GLV Lathe
Machine may be shown with optional accessories.
Electronic infinitely variable high-speed precision gear-head lathe that provides outstanding machining performance.
FEATURES:
- 2-step infinitely variable speed
- Headstock gears are made of chrome-moly steel
- Hardened and precision ground spindle and headstock gears
- A forced lubrication system lubricates all headstock gears and bearings
- The bed is made of high tensile cast iron FC30
- Hardened and ground bed ways
- The leadscrew is equipped with a torque limit safety device
- The feed rod has a built-in overload safety clutch
- An interlocking device in the apron to prevent simultaneous engagement of auto feeding and threading operations
- Digital spindle speed display
- Easy spindle speed change while running by a knob control
- Full length foot brake
- Equipped with high performance and low-noise variable-frequency drive (VFD)
- 5 HP powerful main motor
Non-variable Speed Model
Accessories
STANDARD ACCESSORIES:
- Variable frequency drive (VFD)
- Removable gap
- Tailstock
- Chuck cover with limit switch
- Coolant system
- Full length foot brake
- Dead center M.T. #3
- Center sleeve
- Change gears
- Threading dial indicator
- Leveling screws and pads
- Manual and parts list
MACHINE INCLUDES:
- 6" 3-jaw chuck
- Steady rest with brass tips
- Follow rest
- 4-way tool post
- Full length splash guard
- Halogen work light
- Chuck cover with limit switch
Specifications
| MACHINE | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model(s): | 1440GLV | ||||||||
| Type: | Precision Electronic Variable High-Speed Lathe | ||||||||
| CAPACITY | |||||||||
| Swing over bed: | 14" | ||||||||
| Swing over cross slide: | 8.75" | ||||||||
| Swing over gap: | 20.50" | ||||||||
| Bed width: | 9" | ||||||||
| Distance between centers: | 40" | ||||||||
| HEADSTOCK | |||||||||
| Spindle bore diameter: | 1.56" | ||||||||
| Spindle bore taper: | M.T. #5 | ||||||||
| Taper of center in sleeve: | M.T. #3 | ||||||||
| Spindle nose: | D1-4 | ||||||||
| Number of spindle speeds: | Variable - 2-step | ||||||||
| Range of spindle speeds (rpm): | Low gear: 36 ~ 300 rpm | High gear: 300 ~ 2,200 rpm | |||||||
| THREADS & FEEDS | |||||||||
| Range of longitudinal feeds: | 0.0026" ~ 0.0368"/rev. | ||||||||
| Range of cross feeds: | 0.0009" ~ 0.0123"/rev. | ||||||||
| Inch threads: | 4 ~ 56 TPI x 32 kinds | ||||||||
| Metric threads: | 0.4 ~ 7 mm x 32 kinds | ||||||||
| CARRIAGE | |||||||||
| Cross slide travel: | 7" | ||||||||
| Compound slide travel: | 3.75" | ||||||||
| TAILSTOCK | |||||||||
| Tailstock taper center: | M.T. #3 | ||||||||
| Tailstock quill travel: | 4" | ||||||||
| POWER | |||||||||
| Main motor: | 5 HP 3 Phase | ||||||||
| Coolant pump: | 1/8 HP | ||||||||
| WEIGHT & DIMENSIONS | |||||||||
| Shipping dimensions (LxWxH): | 76" x 32" x 63" | ||||||||
| Gross weight: | 1,810 lb. | ||||||||
* Design and specifications are subject to change without notice.
Machine may be shown with optional accessories