JF-4EVS Mill 10”x54” Table
Machine may be shown with optional accessories.
| Victor JF-4EVS electronic variable speed vertical knee mill driven by 3 HP frequency inverter drive comes with rigid one piece bed and special double wall designed box structure column casting. The mill is built to highest quality standards to ensure reliability and consistency. |
| FEATURES: | - Meehanite casting
- Hardened and ground table and slide ways
- Rigid one piece bed and special double wall designed box structure column casting
- Square slide ways
- Turcite-B on X & Y-axis slide ways
- Double saddle locks
- Precision hand scraped
- High precision chromed quill
- Built-in one shot lube system
- 3 HP frequency inverter drive motor
| | MACHINE INCLUDES: | - Clamping kit
- 6" milling vise
- R8 collet set
- Draw bar
- Front and rear rubber way covers
- One shot lube system
- Toolbox with tools
|
Specifications
| A. MACHINE |
| Model: |
JF-4EVS Electronic Variable Speed Mill |
| B. CAPACITY |
| 01) Table size: |
10” x 54” |
| 02) Longitudinal travel (X-axis): |
40” / 36” with Powerfeed |
| 03) Cross travel (Y-axis): |
16” |
| 04) Vertical travel of knee: |
16” |
| 05) Distance from spindle nose to table: |
21.75” |
| 06) Slide ways: |
Square |
| C. SPINDLE |
| 07) Spindle motor: |
3 HP 3 Ph. (Single phase optional) |
| 08) Spindle taper: |
R8 |
| 09) Spindle speeds: |
60 ~ 4,200 rpm (Inverter drive electronic variable speed) |
| 10) Quill travel: |
5” |
| 11) Quill feeds: |
0.0017” (0.04 mm), 0.0032” (0.08 mm), 0.0053” (0.13 mm) |
| 12) Quill diameter: |
3-3/8” |
| 13) Swiveling angle of head: |
90º |
| 14) Head inward & outward: |
45º |
| D. WEIGHT & DIMENSIONS |
| 15) Overall height: |
84” |
| 16) Overall depth: |
77.18” |
| 17) Overall width: |
105” |
| 18) Packing Dimensions (LxWxH): |
70” x 62” x 76” |
| 19) Approx. Net weight: |
3,450 lb. |
Design and specifications subject to change without notice.
|
|
|
;)
;)
;)
;)
;)